4 Best Chainsaw for Palm Trees [Check This Out]

Are you looking for the best chainsaw for palm trees?

Then you’ve come to the right place because that’s exactly what we’ll be going over in this post.

We’ll be covering chainsaws that are best for cutting down palm trees.

What kind of chainsaw is best for cutting down palm trees?

In a Hurry? Here’s Our Quick Verdict
Husqvarna 18 Inch 445e II Gas Chainsaw
  • Good for casual use and strong enough for tough jobs
  • Powerful 50.2 cc engine
  • Lower fuel consumption and emissions 

Palm trees are softwood. You can easily cut into them, however, they’re filled with sand, water, and dirt. This will quickly dull your chain and dirty your chainsaw. So you don’t need to spend lots of money on a chainsaw for palm trees. You need one that can easily be sharpened and maintained. 

We have listed chainsaws that don’t cost a lot because there’s no need. When cutting, the chainsaw is going to get filthy dirty. So we would recommend not spending lots of money.

Are palm trees easy to cut down?

Palm trees are easy to cut down as long as the chain is sharp and you’ve planned on where the tree is going to fall.

Image Product Features Price
Best Overall Pick
Husqvarna 18 Inch 445e II Gas Chainsaw

Husqvarna 18 Inch 445e II Gas Chainsaw

  • Good for cutting wide trees
  • Powerful engine
  • Automatic chain oiler
Check Price
Best Upgrade Pick
Husqvarna 24 Inch 460 Rancher Gas Chainsaw

Husqvarna 24 Inch 460 Rancher Gas Chainsaw

  • Amazing for cutting big trees
  • Super powerful engine
  • Easy to clean
Check Price
Best Value Pick
Salem Master 6220G 62CC 20

Salem Master 6220G 62CC 20″ Chainsaw

  • Enough power to easily cut palm trees
  • Good for big trees
  • Affordable
Check Price
Best Corded
Oregon CS1500 18-inch 15 Amp Chainsaw

Oregon CS1500 18-inch 15 Amp Chainsaw

  • Self sharpening
  • Corded for unlimited stamina
  • Cheap price with great material quality
Check Price

Husqvarna 445e II

Best Overall Pick
Husqvarna 18 Inch 445e II Gas Chainsaw
  • Good for casual use and strong enough for tough jobs
  • Powerful 50.2 cc engine
  • Lower fuel consumption and emissions 


The engine is 50.2CC, this simply means there’s plenty of power to cut through palm trees without an issue.

Since it’s softwood, this engine will rip through it without an issue. The chain rotates the bar at 9,000rpm, allowing it to be extremely sharp when cutting.


The bar is 18 inches which is plenty of size when felling or splitting palm wood. 18 inches is enough to cut through the majority of palm trees out there.

Inertia activated chain brake

If you experience kickback, the chain brake will stop the chain from spinning without your hand having to hit the brake.

This is because the chain brake is inertia activated. So when there’s a certain amount of force that the chain brake feels, it will stop the chain. A great safety feature.

Automatic chain oiler

To stop your chainsaw from heating up and causing issues, there’s an automatic chain oiler. Keeping your bar nice and cool.

Quick release air filter

The air filter is there to stop debris from getting into the engine. However, when the air filter is full, it will stop functioning and debris may get through to the engine.

That’s why you need to clean it. And it’s easy to clean this air filter since it’s easy to access and pop in and out.


Husqvarna 460

Best Upgrade Pick
Husqvarna 24 Inch 460 Rancher Gas Chainsaw
  • Good for any large task around the home/farm/ranch
  • 60.3cc powerful engine with 24 inch bar
  • Adjustable chain oiler

24 inch bar

This 24 inch bar is for those really big palm trees. Palm trees where a smaller bar just isn’t going to work.

This bar will allow you to fell the really thick palm trees and split thick wood.

Powerful engine

The engine is 60.3CC meaning there’s lots of power to go straight through any palm tree you throw at it.

It will cut through that softwood like butter. It runs at 9,000rpm. So the chain circles around the bar 9,000 times per minute, making it incredibly sharp.

Quick-release air filter

When cutting down palm trees, you’re going to find the air filter getting clogged a lot. The air filter is there to prevent anything from getting into the engine.

And when it’s clogged, that’s when it stops working as it should. You’ll be pleased to know you can very easily access the air filter and clean it.

Side-mounted chain tensioning

As time goes on, the chain will loosen. This will prevent the saw from operating as it should and it could even fly off. Which is obviously dangerous.

That’s why you tension a chainsaw to make sure it’s correctly on the bar. You can access the tensioning mechanism on the side. It’s super easy and quick to tension.


Salem Master 6220G 62CC

Best Value Pick
SALEM MASTER 6220G 62CC 2-Cycle Gas Powered Chainsaw, 20-Inch Chainsaw, Handheld Cordless Petrol Gasoline Chain Saw for Farm, Garden and Ranch
  • 62cc Engine With 20 Inch Bar
  • Ergonomic Design Features
  • Good Value for the Money

High Performance

This gas engine runs at 62CC, simply put this means there’s enough engine power to slice through the palm without an issue. It operates at 8,500rpm (turns per minute).

This means the chain is going around the bar 8,500 times in only 1 minute. The faster the chain turns, the sharper the cut. 

20 inch bar

The 20 inch bar allows you to cut palm trees that are thick. You’ll be able to fell and split thick palm trees. The bar will go straight through the palm tree and cut it straight through.

It’s a hard bar so it won’t wear down after lots and lots of cutting. The chain is also of high quality, it takes a while to become dull and is easy to sharpen.

Quick stop chain brake

The chain brake is incredibly fast to activate. You see, if you get kickback from the saw, the chain brake will automatically stop it.

Kickback is where you hit the nose of the bar on something and it flings-back towards the operator.

The chain break then activates to instantly stop the chain from turning. Preventing your face from getting minced.

Auto Oiler

There’s an automatic oiling mechanism. This way your chain and bar are lubricated at all times.

Keeping your chainsaw cool and operating as it should at all times.


This comes in at a very affordable price. You won’t be breaking the bank when you get this saw. You cannot go wrong.



Best chainsaw for oak trees
Best chainsaw for juniper
Best chainsaw for red gum eucalyptus
Best chainsaw for pine trees


Oregon CS1500

Best Corded Pick
Oregon CS1500 18-inch 15 Amp Chainsaw
  • Self-sharpening chain system
  • Decently sized 18-inch guide bar
  • Corded electric so no gas is needed (chain oil still required)

Self sharpening

The biggest issue you’ll have when cutting palm trees is the chain quickly dulling.

This is due to all the sand, water, and general grit you find in palm trees. You’ll be pleased to know this chainsaw is self sharpening. 

How can it sharpen by itself?

Well it won’t automatically start filing itself, that would be weird and scary. There’s a mechanism built into this.

You press down on the mechanism and the chain will start spinning and going through this mechanism which will sharpen the teeth. And that’s it. It’s really not that complicated.

This is such a great feature since it will save you a lot of time from having to sharpen it manually yourself.

Powerful corded engine

This will never run out of power because you plug it into a power socket, never running out of juice.

It’s able to cut through softwood without an issue. Making it great for splitting palm trees after they’ve been cut down.

Since it’s electric, it’s easy to start. Simply press a button and you’re up and running.

18 inch bar

This bar is 18 inches long, allowing you to deal with thick palm wood. Going straight through without an issue.

I think 18 inches is great for the majority of palm trees out there. It’s not too big or too small for most tasks, that’s for sure.

Very cheap

This comes in at a very cheap price. But keep in mind that even though the price is cheap, it does not mean the quality is cheap.

Overall, it’s a solid chainsaw when dealing with palm trees.



So those were the best chainsaws for palm trees.

Yes, you can cut down a palm tree with a chainsaw. As long as it’s the correct size and has enough power to cut through the tree.

The main issue with cutting a palm tree is having to constantly sharpen your chain since there’s a lot of sand and water inside the tree.