Are you looking for the best chainsaw for red gum eucalyptus?
Well youâ€™ve come to the right place because thatâ€™s exactly what Iâ€™ll be going over.
Iâ€™ve made sure to compile the very best chainsaws for cutting into those red gum trees.
These chainsaws wonâ€™t have an issue going through hardwood.
|Best Overall||Husqvarna 460||
|Husqvarna 450 Rancher II||
|Small Trees||Husqvarna 130||
Husqvarna 460 (For big trees)
- 24 Inch bar
- Gas Powered
- 13.2 lbs. (excl. cutting equipment)
This chainsaw equipped with a 24-inch bar, works wonders if you want to fell large and medium sized red gum eucalyptus.
A large bar like this will allow you to fell trees with a width of up to 22 inches, which is quite big, with ease. Splitting wood and bucking will come easy with the 24-inch bar.
Easy Cleaning and Maintenance
The Husqvarna 460 comes equipped with a centrifugal air cleaning system so larger debris will be removed before reaching the air filter. That means a longer lifespan for the air filter.
Air filters will definitely need change every now and then though. But donâ€™t sweat it, when the time does come for you to change them there is a quick release air filter.
Just swap it with a new one and youâ€™re ready to go. Other maintenance is also easy with this chainsaw. The side mounted chain tensioning system is a quick and easy solution for when the chain gets loose.
An automatic chain oiling system will release oil steadily to keep the chain lubricated.
Equipped with a 60.3 cc engine, the Husqvarna 460 Rancher will have you felling red gum Eucalyptus trees with ease.
Having the powerful gas powered engine paired perfectly with the 24 inch bar you will be cutting wood with minimal effort. Gas powered means no cord. Working remotely?
No problem, just fill up the tank and get to work.
Husqvarna 450 Rancher II
- 20-inch bar
- 11.3 lbs. (excl. cutting equipment)
- Gas powered
The Husqvarna 450 Rancher comes with a 20-inch bar which is enough to cut trees with a width of 18 inches.
Bucking will definitely not be an issue for you if you are wielding this chainsaw. Just prop up your wood, start your 450 rancher II and get going.
The engine on this chainsaw is one of the best out there.
It is equipped with the patented X-Torq engine. This engine has considerably low fuel consumption and is in accordance with the most severe environmental conditions.
But that doesnâ€™t mean it has compromised the power. It doesnâ€™t mean that at all, with a rotation per minute(RPM) of up to 9000, you will have no issues when felling and bucking Red Gum Eucalyptus trees.
Maintaining your chainsaw is one of if not the most important part of owning a chainsaw. If you donâ€™t maintain your chainsaw it will not function optimally and it will not have a long life.
So letâ€™s start with the cover. Gaining access to maintain the chainsaw is easy. It has a snap lock cylinder cover, just a few locks and youâ€™re in.
Once open you will gain access to the quick release air filter, another perk of this chainsaw. Although, the air filter will not need changing very often due to the centrifugal air cleaning system.
It stops larger debris from reaching the filter. The automatic chain oiling system will also keep the chain lubricated so you can focus on your work.
- Gas Engine
- 20â€™â€™ bar
This chainsaw with its 20-inch bar is a fantastic option for people that cut trees regularly.
The fairly large bar provides the appropriate length to fell red gum eucalyptus trees with a width of up to 18 inches. Buckling with this chainsaw is easy enough because the bar has the capacity for it.
The COOCHEER 20â€ has a 62cc gas powered engine. The engine has the ability to go up to 8500rpm (turns per minute).
With that much power, you can cut through any Red Gum Eucalyptus wood without straining yourself. Starting the engine should be faster than most gas powered chainsaws.
Equipped with a big rope wheel, it has reduced drag and will start quickly.
High quality chain
This chainsaw is known for having great chains. The manufacturers use imported chains that are extremely durable and wear resistant.
With proper care, the service life can go up to 5 times more than the ordinary chainsaw chain. Now, you might be thinking 5 years? I doubt that.
Well I was a bit skeptical at first too but the chainsaw has an automatic chain oiling system that will continuously lubricate the chain while in use, in turn reducing wear, so itâ€™s definitely not a crazy claim.
And the best part about the COOCHEER 20 is the price. Itâ€™s definitely one of the best chainsaws you can get without emptying your bank account.
Husqvarna 130 (For small trees)
- 16-inch bar
- Gas powered
- Weighs 10.3lbs
Great for HomeOwners
The Husqvarna 130 is great for yard work and cutting down small Red Gum Eucalyptus trees. If there is a small Red Gum tree in your yard that you want to fell, then this 16-inch chainsaw will do the trick.
With a modest 38cc power engine it wonâ€™t be the most powerful chainsaw by quite a margin but it will easily take down small trees and bucking capabilities are also good.
Easy to handle and maintain
This chainsaw comes with an automatic chain lubrication system that lubricates the chain as you work. So when youâ€™re running low just fill up the tank and you can rest assured your chain is lubricated.
It is also on the lighter side of the scale, weighing only 10.3lbs, you can hold this chainsaw without strain. It is well balanced so working long hours with it wonâ€™t cramp your arms.
It is a modest machine. Itâ€˜s not the most powerful or the largest but it will get the job done. Itâ€™s lighter than most and consumes less fuel. It has low vibration so your wrists wonâ€™t suffer while working.
Overall a great buy for red gum eucalyptus.
The best chainsaw for red gum eucalyptus is the Husqvarna 460. It has a 24 inch bar, 60.3cc gas powered engine, and weighs 13.2lbs. The oil tank volume is 0.7 US pint and oil pump capacity of 17. Youâ€™ll be felling and bucking red gum with ease.
Hope you found what you were looking for.